The Part Is Cheap. The Access Is What Costs You.

✅ 15 inches of additional access
✅ All-metal construction
✅ Impact rated up to 53 ft-lb
✅ Four drive adapters included
✅ 60-day money-back guarantee

Rated 4.8/5 from 30,000+ WildBear customers

A starter, water pump, spark plug or alternator may only be held in place by a few bolts.

But if those bolts are buried behind a bracket, against the frame or jammed up against a firewall, a straightforward repair can become an expensive garage job.

You end up paying thousands to turn four bolts…

Not because you couldn’t just do it yourself but because you end up paying through the nose for the hours spent removing everything needed to reach them.

The WildBear Offset Extension lets you skip that disassembly and get straight to the bolt, turning a garage job into a simple fix at home.

Attach your socket to one end of the WildBear.

Slide the thin extension into the restricted space and place the socket onto the bolt.

Connect your ratchet or impact at the accessible end.

As you turn, the hardened internal chain carries the rotation along the extension and turns the buried bolt.

You do the repair.

And you can stop paying a garage to reach it for you.

1. Socket on

2. Slide it in

3. Turn from the open end

A normal extension gives you more reach in a straight line.

That does not help when a bracket, hose or frame rail blocks the space directly behind the bolt.

The WildBear places the socket and ratchet at opposite ends of a thin, flat bar.

The socket reaches into the restricted space.

Your ratchet stays where there is room to work.

Most customers buy the WildBear for one specific repair.

Then they keep finding other uses for it.

• Starter motors
• Alternator brackets
• Spark plugs
• Water pumps
• Valve covers
• Transmission bolts
• Engine mounts
• RV repairs
• Motorcycles and ATVs
• Tractors and workshop projects

You may not need it every day.

But when one buried bolt is holding up the entire job, nothing else in your toolbox gives you the kind of access you need like the Wildbear.

Works With the Tools You Already Own

Every WildBear Offset Extension 2.0 includes:

• 1/4-inch square-drive adapter
• 3/8-inch square-drive adapter
• 1/2-inch square-drive adapter
• 1/4-inch hex adapter

Connect your existing socket at one end and your ratchet, impact or driver at the other.

No special sockets required.

The WildBear Offset Extension 2.0 features:

• An all-metal body
• Hardened Duo-Roller chain
• Machined internal sprockets
• 53 ft-lb maximum rating
• Impact compatibility
• Four locking adapters

For a heavily rusted or seized bolt, break it loose with the appropriate tool first whenever possible.

Then use the WildBear to remove or reinstall it where access is restricted.

Similar-looking tools do not always have the same construction or torque rating.

Before buying one, check:

• Is it all metal?
• Is it impact rated?
• Does it state its maximum torque?
• Are all four adapters included?
• Can you return it after trying it?

WildBear gives you all five, backed by a 60-day money-back guarantee.

The WildBear only costs $79.

A single garage quote caused by difficult access can cost hundreds or even thousands.

Sometimes the tool saves you 20 minutes.

Sometimes it saves hours of disassembly.

Sometimes it is the difference between completing the repair yourself and paying someone else to do it.

It only needs to save you from one jacked up garage bill to make sense.

After that, it is ready for every other buried bolt you find.

Every WildBear Offset Extension 2.0 comes with a 60-day money-back guarantee.

Use it on the bolt you bought it for or the project you’ve been putting off.

If it does not work for your situation, return it within 60 days for your money back.

No guessing whether it belongs in your toolbox.

Try it and find out.

When you find it, you have two choices.

Pay a garage for the hours required to reach it.

Or put the socket end of the WildBear onto it, turn from the open end and finish the repair yourself.